Manufactured using metal facings bonded to a high density
structural stone wool core, Eurobond's panels offer exceptional
spanning characteristics. Following significant development and
testing, Eurobond composite panels can be used to span up to
Using panels that can span up to 7.5m means that secondary
steelwork can either be eliminated or significantly reduced
allowing the following benefits:
- Reduction in build time
- Reduction in steelwork cost
- Cleaner, uncluttered internal appearance
- Increase in useable internal area of the building
Wind pressure, suction and temperature are the only significant
load elements, except for handling considerations, constraining the
length of the panel.
Wind loads are dependent on the building location and
dimensions. The calculation of the wind loads, as laid down in BS
6399: Part 2: 1997, is a complex and demanding procedure, and must
be undertaken by a qualified engineer.
*Dependant on project/building environment we
can sometimes offer spans in excess of 7.5m please contact the
Eurobond technical department for project specific information.